Complete the Form

Do you need to monitor analog voltages?*

e.g. Temperature, voltages, currents, pressures, fuel levels, etc.

Yes
No

How many analog inputs do you need, per site?

Please enter a value between 0 and 256.

Which of these analog sensors do you need?

How many Indoor Temperature sensors do you need in total, for all your sites?*

How many Outdoor Temperature sensors do you need in total, for all your sites?*

How many Relative Humidity sensors do you need in total, for all your sites?*

How many Single Phase Voltage sensors do you need in total, for all your sites?*

How many 3-Phase Voltage sensors do you need in total, for all your sites?*

What is the voltage Range you want to measure with the 3-Phase Voltage sensor?*

208/240 VAC, 3-Phase
480 VAC, 3-Phase
600 VAC, 3-Phase
Different for each sites

Please specify below how many of each you need:

A = 208/240 VAC, 3-Phase
B = 480 VAC, 3-Phase
C = 600 VAC, 3-Phase

Do you also need to measure AC current?*

Yes
No

What current range will you be measuring at your sites?*

50 A (Maximum wire diameter is 0.7" (17.8mm))
250 A (Maximum wire diameter is 1.25" (31.7mm))
500 A (Maximum wire diameter is 2.0" (50.8mm))
Different for each sites

Please specify below how many of each you need:

A = 50 A (Maximum wire diameter is 0.7" (17.8mm))
B = 250 A (Maximum wire diameter is 1.25" (31.7mm))
C = 500 A (Maximum wire diameter is 2.0" (50.8mm))

How many DC Voltage sensors do you need in total, for all your sites?*

How many AC Current sensors do you need in total, for all your sites?*

What DC current range do you want to measure?*

20 A DC
100 A DC

How many DC Current sensors do you need in total, for all your sites?*

How many Battery Temperature sensors do you need in total, for all your sites?*

How many Fuel Level sensors do you need in total, for all your sites?*

What is the depth of your tanks?*

*** Not suitable for fuels which contain Toluene. ***

Please specify below the number of tanks and their depth:

Do you have a Rochester-Ready gauge and dial on your fuel tank.*

Yes
No
I don't know

How many Liquid Propane Measurement sensors do you need in total, for all your sites?*

How many Line Pressure sensors do you need in total, for all your sites?*

How many VSWR/Forward/Reflected Power sensors do you need in total, for all your sites?*

What frequency range do you require for the VSWR/Forward/Reflected Power sensor?*

30-500 MHz
500-950 MHz
Different for all my sites

Please specify below how many of each you need:

A = 30-500 MHz
B = 500-950 MHz

What type of "N" type connectors do you require?*

Female input (from TX) and female output (to antenna)
Male input (from TX) and female output (to antenna)

What is the line frequency of your power utility?*

50 Hz
60 Hz

How many Power-Line Frequency sensors do you need in total, for all your sites?*

Step 1 of 7